Year created | 1995 |
---|---|
Created by | Apple Computer, Inc. |
Width in bits | 1 |
Number of devices | 63 |
Capacity | 400–3200 Mbit/s (50–400 MB/s) |
Style | Serial |
Hotplugging interface | Yes |
External interface | Yes |
The IEEE 1394 interface is a serial bus interface standard for high-speed communications and isochronous real-time data transfer, frequently used by personal computers, as well as in digital audio, digital video, automotive, and aeronautics applications. The interface is also known by the brand names of FireWire (Apple), i.LINK (Sony), and Lynx (Texas Instruments). IEEE 1394 replaced parallel SCSI in many applications, because of lower implementation costs and a simplified, more adaptable cabling system. The 1394 standard also defines a backplane interface, though this is not as widely used.
IEEE 1394 was adopted as the High-Definition Audio-Video Network Alliance (HANA) standard connection interface for A/V (audio/visual) component communication and control.[1] FireWire is also available in wireless, fiber optic, and coaxial versions using the isochronous protocols.
Nearly all digital camcorders have included a four-circuit 1394 interface, though, except for premium models, such inclusion is becoming less common. It remains the primary transfer mechanism for high-end professional audio and video equipment. Since 2003, many computers intended for home or professional audio/video use have built-in FireWire/i.LINK ports, especially prevalent with Sony and Apple's computers. The legacy (alpha) 1394 port is also available on premium retail motherboards.
Contents |
FireWire is Apple's name for the IEEE 1394 High Speed Serial Bus. It was initiated by Apple (in 1986[2]) and developed by the IEEE P1394 Working Group, largely driven by contributions from Apple, although major contributions were also made by engineers from Texas Instruments, Sony, Digital Equipment Corporation, IBM, and INMOS/SGS Thomson (now STMicroelectronics).
Apple intended FireWire to be a serial replacement for the parallel SCSI bus while providing connectivity for digital audio and video equipment. Apple's development began in the late 1980s, later presented to the IEEE,[3] and was completed in 1995. As of 2007, IEEE 1394 is a composite of four documents: the original IEEE Std. 1394-1995, the IEEE Std. 1394a-2000 amendment, the IEEE Std. 1394b-2002 amendment, and the IEEE Std. 1394c-2006 amendment. On June 12, 2008, all these amendments as well as errata and some technical updates were incorporated into a superseding standard IEEE Std. 1394-2008.[4]
Apple's internal long-time code-name for FireWire was "Chefcat" starting in 1988 as the team sat around a conference table contemplating what to call the project and staring at Michael Johas Teener's famous Kliban coffee mug. The was the "aha" moment articulating the goals of the new interconnect, at low cost and ultimate simplicity presented to the user to replace and unify all other PC interconnections and expand beyond that base to enable ultimate miniaturization of electronics. The concept of the current loop electronics that became the now pervasive LVDS was code named "Greyhound" around 1992.
Sony's implementation of the system, "i.LINK", used a smaller connector with only the four signal circuits, omitting the two circuits which provide power to the device in favor of a separate power connector. This style was later added into the 1394a amendment.[3] This port is sometimes labeled "S100" or "S400" to indicate speed in Mbit/s.
The system is commonly used for connection of data storage devices and DV (digital video) cameras, but is also popular in industrial systems for machine vision and professional audio systems. It is preferred over the more common USB for its greater effective speed and power distribution capabilities. Perhaps more important, FireWire uses all SCSI capabilities and has high sustained data transfer rates, important for audio and video editors. Benchmarks show that the sustained data transfer rates are higher for FireWire than for USB 2.0, but lower than USB 3.0. Results are marked on Apple Mac OS X but more varied on Microsoft Windows.[5][6]
However, the royalty which Apple and other patent holders initially demanded from users of FireWire (US$0.25 per end-user system) and the more expensive hardware needed to implement it (US$1–$2), both of which have since been dropped , have prevented FireWire from displacing USB in low-end mass-market computer peripherals, where product cost is a major constraint.[3]
FireWire can connect up to 63 peripherals in a tree chain topology (as opposed to Parallel SCSI's electrical bus topology). It allows peer-to-peer device communication — such as communication between a scanner and a printer — to take place without using system memory or the CPU. FireWire also supports multiple hosts per bus. It is designed to support Plug and play and hot swapping. The copper cable it uses (1394's most common implementation) can be up to 4.5 metres (15 ft) long and is more flexible than most Parallel SCSI cables. In its six-circuit or nine-circuit variations, it can supply up to 45 watts of power per port at up to 30 volts, allowing moderate-consumption devices to operate without a separate power supply.
FireWire devices implement the ISO/IEC 13213 "configuration ROM" model for device configuration and identification, to provide plug-and-play capability. All FireWire devices are identified by an IEEE EUI-64 unique identifier (an extension of the 48-bit Ethernet MAC address format) in addition to well-known codes indicating the type of device and the protocols it supports.
Full support for IEEE 1394a and 1394b is available for Microsoft Windows XP, FreeBSD,[7] Linux,[8] Apple Mac OS 8.6 through Mac OS 9,[9] Mac OS X, NetBSD, and Haiku. Historically, performance of 1394 devices may have decreased after installing Windows XP Service Pack 2, but were resolved in Hotfix 885222[10] and in SP3. Some FireWire hardware manufacturers also provide custom device drivers which replace the Microsoft OHCI host adapter driver stack, enabling S800-capable devices to run at full 800 Mbit/s transfer rates on older versions of Windows (XP SP2 w/o Hotfix 885222) and Windows Vista. At the time of its release, Microsoft Windows Vista supported only 1394a, with assurances that 1394b support would come in the next service pack.[11] Service Pack 1 for Microsoft Windows Vista has since been released, however the addition of 1394b support is not mentioned anywhere in the release documentation.[12][13][14] The 1394 bus driver was rewritten for Windows 7 to provide support for higher speeds and alternative media.[15]
Cable TV providers (in the US, with digital systems) must, upon request of a customer, provide a high-definition capable cable box with a functional FireWire interface. This applies only to customers leasing high-definition capable cable boxes from said cable provider after April 1, 2004. The relevant law is 47 CFR 76.640 Section 4 Subsections i and ii.[16] The interface can be used to display or record Cable TV, including HDTV programming.[17]
FireWire devices are organized at the bus in a tree topology. Each device has a unique self-id. One of the nodes is elected root node and always has the highest id. The self-ids are assigned during the self-id process, which happens after each bus resets. The order in which the self-ids are assigned is equivalent to traversing the tree depth-first, post-order.
The previous standards and its three published amendments are now incorporated into a superseding standard, IEEE 1394-2008[4]. The features individually added give a good history on the development path.
The original release of IEEE 1394-1995[18] specified what is now known as FireWire 400. It can transfer data between devices at 100, 200, or 400 Mbit/s half-duplex data rates (the actual transfer rates are 98.304, 196.608, and 393.216 Mbit/s, i.e. 12.288, 24.576 and 49.152 megabytes per second respectively).[3] These different transfer modes are commonly referred to as S100, S200, and S400.
Cable length is limited to 4.5 metres (14.8 ft), although up to 16 cables can be daisy chained using active repeaters; external hubs, or internal hubs are often present in FireWire equipment. The S400 standard limits any configuration's maximum cable length to 72 metres (236 ft). The 6-circuit connector is commonly found on desktop computers, and can supply the connected device with power.
The 6-circuit powered connector, now referred to as an alpha connector, adds power output to support external devices. Typically a device can pull about 7 to 8 watts from the port; however, the voltage varies significantly from different devices.[19] Voltage is specified as unregulated and should nominally be about 25 volts (range 24 to 30). Apple's implementation on laptops is typically related to battery power and can be as low as 9 V.[19]
An amendment, IEEE 1394a, was released in 2000,[20] which clarified and improved the original specification. It added support for asynchronous streaming, quicker bus reconfiguration, packet concatenation, and a power-saving suspend mode.
1394a also standardized the 4-circuit alpha connector developed by Sony and trademarked as "i.LINK", already widely in use on consumer devices such as camcorders, most PC laptops, a number of PC desktops, and other small FireWire devices. The 4-circuit connector is fully data-compatible with 6-circuit alpha interfaces but lacks power connectors.
IEEE 1394b-2002[21] introduced FireWire 800 (Apple's name for the 9-circuit "S800 bilingual" version of the IEEE 1394b standard) This specification and corresponding products allow a transfer rate of 786.432 Mbit/s full-duplex via a new encoding scheme termed beta mode. It is backwards compatible to the slower rates and 6-circuit alpha connectors of FireWire 400. However, while the IEEE 1394a and IEEE 1394b standards are compatible, FireWire 800's connector, referred to as a beta connector, is different from FireWire 400's alpha connectors, making legacy cables incompatible. A bilingual cable allows the connection of older devices to the newer port. In 2003, Apple was the first to introduce commercial products with the new connector.
The full IEEE 1394b specification supports data rates up to 3200 Mbit/s (i.e. 400 megabytes/s) over beta-mode or optical connections up to 100 metres (110 yd) in length. Standard Category 5e unshielded twisted pair supports 100 metres (330 ft) at S100. The original 1394 and 1394a standards used data/strobe (D/S) encoding (renamed to alpha mode) on the circuits, while 1394b adds a data encoding scheme called 8B10B referred to as beta mode.
In December 2007, the 1394 Trade Association announced that products would be available before the end of 2008 using the S1600 and S3200 modes that, for the most part, had already been defined in 1394b and was further clarified in IEEE Std. 1394-2008.[4] The 1.6 Gbit/s and 3.2 Gbit/s devices use the same 9-circuit beta connectors as the existing FireWire 800 and will be fully compatible with existing S400 and S800 devices. It will compete with the forthcoming USB 3.0.[22]
S1600 (Symwave [23]) and S3200 (Dap Technology [24]) development units have been made, with the latter promising a consumer version by late 2010.
IEEE 1394c-2006 was published on June 8, 2007.[25]
It provided a major technical improvement, namely new port specification that provides 800 Mbit/s over the same 8P8C (Ethernet) connectors with Category 5e cable, which is specified in IEEE 802.3 clause 40 (gigabit Ethernet over copper twisted pair) along with a corresponding automatic negotiation that allows the same port to connect to either IEEE Std 1394 or IEEE 802.3 (Ethernet) devices.
Though the potential for a combined Ethernet and FireWire 8P8C port is intriguing, as of November 2008[update], there are no products or chipsets which include this capability.
A project named IEEE P1394d was formed by the IEEE on March 9, 2009 to add single mode fiber as an additional transport medium to FireWire.[26]
Other future iterations of FireWire are expected to bring a bump in speed to 6.4 Gbit/s and additional connectors such as the small multimedia interface.[27]
Although current high-speed USB 2.0 (introduced in 2001) is quoted as running at a higher signaling rate (480Mbps) than legacy FireWire 400 (400 Mbps, available since 1995), data transfers over S400 FireWire interfaces generally outperform similar transfers over USB 2.0 interfaces. Few if any USB 2.0 device implementations are able to saturate the entire 480 Mbps, but this can be achieved with multiple devices on the same bus. Typical USB PC hosts rarely can sustain transfers exceeding 280 Mbit/s, with 240 Mbit/s being more typical. This is likely due to USB's reliance on the host processor to manage low-level USB protocol, whereas FireWire delegates the same tasks to the interface hardware (requiring less or no CPU usage). For example, the FireWire host interface supports memory-mapped devices, allowing high-level protocols to run without loading the host CPU with interrupts and buffer-copy operations.[5]
Besides throughput, other differences are that FireWire uses simpler bus networking, provides more power over the chain and more reliable data transfer, and is less taxing on a CPU.[28]
FireWire 800 is substantially faster than Hi-Speed USB.[29] Even so, not all personal computers utilize the FireWire protocol. Apple includes FireWire on some of its computers, not including the ultra-portable MacBook Air and consumer-branded MacBook. It is included on some HP portables (2540p and 2740p) as well as most Sony VAIOs and Lenovo ThinkPads.
IEEE 1394b is used in military aircraft. Developed for use as the data bus on the F-22 Raptor, it is also used on the F-35 Lightning II.[30] NASA's Space Shuttle also uses IEEE 1394b to monitor debris (foam, ice) which may hit the vehicle during launch.[30]
IDB-1394 Customer Convenience Port (CCP) is the automotive version of the 1394 standard.[31]
Audio monitoring for vibrations in the power transmission in wind driven electrical turbines uses a 1394 network for data gathering.[32]
FireWire can be used for ad-hoc (terminals only, no routers except where a FireWire hub is used) computer networks. Specifically, RFC 2734 specifies how to run IPv4 over the FireWire interface, and RFC 3146 specifies how to run IPv6.
Mac OS X, Linux, and FreeBSD include support for networking over FireWire.[33] Windows Me [34], Windows XP and Windows Server 2003 include native support for IEEE 1394 networking.[35] Windows 2000 does not have native support but may work with third party drivers. A network can be set up between two computers using a single standard FireWire cable, or by multiple computers through use of a hub. This is similar to Ethernet networks with the major differences being transfer speed, circuit length, and the fact that standard FireWire cables can be used for point-to-point communication.
On December 4, 2004, Microsoft announced that it would discontinue support for IP networking over the FireWire interface in all future versions of Microsoft Windows.[36] Consequently, support for this feature is absent from Windows Vista and later Windows releases.[37][38] Microsoft rewrote their 1394 driver in Windows 7 [39] but networking support for FireWire is not present. Unibrain offers free FireWire networking drivers for Windows called ubCore [40] which support Windows Vista and later versions.
The PlayStation 2 console had an i.LINK-branded 1394 connector. This was used for networking until the release of an Ethernet adapter late in the console's lifespan, but very few software titles supported the feature.
IIDC (Instrumentation & Industrial Digital Camera) is the FireWire data format standard for live video, and is used by Apple's iSight A/V camera. The system was designed for machine vision systems[41] but is also used for other computer vision applications and for some webcams. Although they are easily confused since they both run over FireWire, IIDC is different from, and incompatible with, the ubiquitous AV/C (Audio Video Control) used to control camcorders and other consumer video devices.[42]
Digital Video (DV) is a standard protocol used by some digital camcorders. Formerly, all DV cameras had a FireWire interface (usually a 4-circuit), but since the recent shift to solid state memory recording (SD Cards and Hard Drives), many consumer brands have switched to USB. Labeling of the port varies by manufacturer, with Sony using either its i.LINK trademark or the letters 'DV'. Many digital video recorders have a "DV-input" FireWire connector (usually an alpha connector) which can be used to record video from a directly-connected DV camcorder ("computer-free").
The protocol also allows remote control (play, rewind, etc.) of connected devices.
IEEE 1394 interface is commonly found in frame grabbers, devices that capture and digitize an analog video signal; however, IEEE 1394 is facing competition from the Gigabit Ethernet interface (citing speed and availability issues)..
Devices on a FireWire bus can communicate by direct memory access (DMA), where a device can use hardware to map internal memory to FireWire's "Physical Memory Space". The SBP-2 (Serial Bus Protocol 2) used by FireWire disk drives uses this capability to minimize interrupts and buffer copies. In SBP-2, the initiator (controlling device) sends a request by remotely writing a command into a specified area of the target's FireWire address space. This command usually includes buffer addresses in the initiator's FireWire "Physical Address Space", which the target is supposed to use for moving I/O data to and from the initiator.[43]
On many implementations, particularly those like PCs and Macs using the popular OHCI, the mapping between the FireWire "Physical Memory Space" and device physical memory is done in hardware, without operating system intervention. While this enables high-speed and low-latency communication between data sources and sinks without unnecessary copying (such as between a video camera and a software video recording application, or between a disk drive and the application buffers), this can also be a security risk if untrustworthy devices are attached to the bus. For this reason, high-security installations will typically either purchase newer machines which map a virtual memory space to the FireWire "Physical Memory Space" (such as a Power Mac G5, or any Sun workstation), disable the OHCI hardware mapping between FireWire and device memory, physically disable the entire FireWire interface, or do not have FireWire.
This feature can be used to debug a machine whose operating system has crashed, and in some systems for remote-console operations. On FreeBSD, the dcons driver provides both, using gdb as debugger. Under Linux, firescope[44] and fireproxy[45] exists.
This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.
|
|